Home >> Products >> Frequency Converters >> 3Phase In / 1 Phase Out >> Eternalight Mini

Eternalight Mini
Single Phase, ( 500-3000 VA )

The new Eternalight is a low cost, single phase, compact, space saving, central lighting inverter that replaces older larger and higher cost cabinets.

The Eternalight integrates the latest in solid-state technology that enables DSPM to reduce the overall size of the cabinet by 25% over standard cabinets, allowing you to make better use of your floor space while increasing reliability.

The Eternalight integrated solid-state technology reduces maintenance time of critical egress lighting, making the Eternalight more efficient and effective in keeping your system eternally lit when you need it most.

The Eternalight small foot-print measuring only (25"H x 24"W x 16"D).
This provides installation flexibility for wall mounting, floor mounting or ceiling mounting the cabinet into areas that large cabinets can not fit.

The unit's front access control panel also makes it easier for maintenance.

The Eternalight is a true On-line 90 minutes UPS for HPS, HID, Incandescent and fluorescent lamp applications.


HPS, HID, Incandescent, Fluorescent

Small Footprint

Low Input Harmonic Current

Sine Wave Output

Front Access and Easy Installation

Fully Self Contained

Reliable (200,000 hrs MTBF)





Low Profile Compact Cabinet Battery ON Indicator = AC Line Switch
90 minutes battery back-up Charger ON Indicator = Test Button
AC Power ON Indicator DC Battery Switch

*Specifications are subject to change without notice.



BATTERIES

- Sealed, maintenance-free, lead acid (AGM) batteries.

- 10 year prorated warranty

- DSP Smart Battery Monitoring System is temperature compensated maintaining maximum runtime and battery life

- Microprocessor controlled recharge and DSP overcharge protection standard

LAMPS AND LOADS

- Emergency power provides FULL LIGHT OUTPUT from all lamps and fixtures for the entire runtime

- Compatible with fluorescent, compact fluorescent, incandescent, quartz, H.I.D., LED and other lamp types

- Standard or LED Exits and other safety equipment

PROTECTION

- Provides overload, surge and undercurrent protection using DSP/PWM "Watchdog Monitoring" Protection System

- Surge protection against load surges as defined in ANSI/IEEE C62.45 category A and B

DIAGNOSTICS AND MAINTENANCE

- DSP/PWM Watchdog Monitoring System provides complete self-diagnostic capabilities

- Informative advanced DSP Metering Display and Alarms keep you in control of your emergency lighting environment 24/7

- Automatically performs periodic self-tests ensuring a safety lighted environment prior to an emergency

- Single point of testing instead of hundreds with battery packs.

CABINET

- Free Standing Indoor or Outdoor available

- NEMA 1 standard

NEMA 3R 4X or NEMA 12X for harsh environments

- Modular design enables flexible installation

- Forced air cooling for maximum reliability

- Systems up to 7.5 KVA are self contained; larger systems require external Battery Cabinet(s)

INSTALLATION

- Modular design and small footprint allow easy installation in electrical closet or other convenient locations

- Factory Start-Up available on all systems

SPECIAL APPLICATIONS

- DSPM PowerClone offers numerous UL924 optional devices to meet unusual or difficult application parameters

- ECI - Patented Emergency Circuit Interface modules allow fixtures and lamps on the emergency circuit(s) to be operated by normal switching and/or dimming devices in NON-emergency conditions

- Phoenix "HOT" Switch (Hydrogen Off-gassing Termination)

- Dimming Panel Interface allows use with emergency lights controlled by common dimmer panel

- DSP Remote Shutdown and programmable timers help stabilize lighting environment

CODES

- CSA Listed to UL924, NFPA 101, NFPA 70, NEC and OSHA

WARRANTY

- 1-year full warranty on system electronics.  Battery warranty 1-year with 9-years pro-rata.  System 1-year on-site warranty labor with DSPM supervised Start-Up.

- Maintenance contracts available.









Sizes 500, 750, 1000, 1250, 1500, 2000, and 3000VA
Input Voltage 120 ,208, 240, or 277 VAC
Output Voltage 120, 240, 277 or 120/240 VAC
Output Frequency 60 Hz. +/- 1%
Output Voltage Regulation ±3% for all loads and for Battery Discharge mode
Output Wave Form Sinewave <5% with 100% linear load
Output Protection Current limiting and short circuit protection
Efficiency >85%
Battery Sealed, Maintenance free (AGM)
Recharge Time Recharge Time per UL 924
Cabinet Dimension 24? Width, 27? Height, 16? Depth
Humidity 0 - 95% RH non-condensing
Operating Temp 0°C to +40°C. (-32°F to 104°F)
Operating Altitude Up to 6000 feet (1,829 m)
Non-Operating Up to 10,000 feet (3,048 m)
* Consult factory for others,  Specifications are subject to change without notice.

WATTS INPUT
VOLTS
MODEL NUMBERS
CABINET
W x H x D
CABINET
WEIGHT
Factory Selectable
FACTORY OPTIONS
350W
120 VAC AA.50160209-090
24"W x 25"H x 16"D
260LBS Output Circuit Breakers:
Available in increments of 1, 3, 6, 9 or 12 Normally On Load (NOL)
Normally Off Load (NOFFL)
Maintenance Bypass (MSB)
50 or 60 Hz Three Phase Configurations
Factory Start Up (FSU) Extended
Warranty (EW)
Outdoor or Harsh
Enviromental Cabinets
208 VAC AA.50160409-090
240 VAC AA.50160809-090
277 VAC AA.50160909-090
525W
120 VAC AA.75160209-090
24"W x 25"H x 16"D
310LBS
208 VAC AA.75160409-090
240 VAC AA.75160809-090
277 VAC AA.75160909-090
700W
120 VAC AA1.0160209-090
24"W x 25"H x 16"D
350LBS
208 VAC AA1.0160409-090
240 VAC AA1.0160809-090
277 VAC AA1.0160909-090
875W
120 VAC AA1.2160209-090
24"W x 25"H x 16"D
445LBS
208 VAC AA1.2160409-090
240 VAC AA1.2160809-090
277 VAC AA1.2160909-090
1050W
120 VAC AA1.5160209-090
24"W x 25"H x 16"D
455LBS
208 VAC AA1.5160409-090
240 VAC AA1.5160809-090
277 VAC AA1.5160909-090
1400W
120 VAC AA2.0160209-090
24"W x 25"H x 16"D
510LBS
208 VAC AA2.0160409-090
240 VAC AA2.0160809-090
277 VAC AA2.0160909-090
2000W
120 VAC AA3.0160209-090
24"W x 25"H x 16"D
550LBS
208 VAC AA3.0160409-090
240 VAC AA3.0160809-090
277 VAC AA3.0160909-090