|
PLC
|
|
PLC Series Emergency Lighting System (2.4KW - 4.2 KW)
|
|
|
|
 BATTERIES
- Sealed, maintenance-free, lead acid (AGM) batteries.
- 10 year prorated warranty
- DSP Smart Battery Monitoring System is temperature compensated maintaining maximum runtime and battery life
- Microprocessor controlled recharge and DSP overcharge protection standard
|
 |
|
LAMPS AND LOADS
- Emergency power provides FULL LIGHT OUTPUT from all lamps and fixtures for the entire runtime
- Compatible with fluorescent, compact fluorescent, incandescent, quartz, H.I.D., LED and other lamp types
- Standard or LED Exits and other safety equipment
|
|
PROTECTION
- Provides overload, surge and undercurrent protection using DSP/PWM "Watchdog Monitoring" Protection System
- Surge protection against load surges as defined in ANSI/IEEE C62.45 category A and B
|
|
DIAGNOSTICS AND MAINTENANCE
- DSP/PWM Watch-dog Monitoring System provides complete self-diagnostic capabilities
- Informative advanced DSP Metering Display and Alarms keep you in control of your emergency lighting environment 24/7
- Automatically performs periodic self-tests ensuring a safety lighted environment prior to an emergency
- Single point of testing instead of hundreds with battery packs.
|
|
CABINET
- Free Standing Indoor or Outdoor available
- NEMA 1 standard
- NEMA 3R 4X or NEMA 12X for harsh environments
- Modular design enables flexible installation
- Forced air cooling for maximum reliability
- Systems up to 7.5 KVA are self contained; larger systems require external Battery Cabinet(s)
|
|
INSTALLATION
- Modular design and small footprint allow easy installation in electrical closet or other convenient locations
- Factory Start-Up available on all systems
|
|
SPECIAL APPLICATIONS
- DSPM PowerClone offers numerous UL924 optional devices to meet unusual or difficult application parameters
- ECI - Patented Emergency Circuit Interface modules allow fixtures and lamps on the emergency circuit(s) to be operated by normal switching and/or dimming devices in NON-emergency conditions
- Phoenix "HOT" Switch (Hydrogen Off-gassing Termination)
- Dimming Panel Interface allows use with emergency lights controlled by common dimmer panel
- DSP Remote Shutdown and programmable timers help stabilize lighting environment
|
|
CODES
- CSA Listed to UL924, NFPA 101, NFPA 70, NEC and OSHA
|
|
WARRANTY
- 1-year full warranty on system electronics. Battery warranty 1-year with 9-years pro-rata. System 1-year on-site warranty labor with DSPM supervised Start-Up.
- Maintenance contracts available.
|
|
|
|
 |
 |
 |
UL 1778
|
|
High Efficiency >92% |
|
Reliability (200,000 hrs.) |
|
Energy Star Rated - TP1 |
|
Industrial Application |
|
Service Access Front Only |
|
DSP/PWM Inverter |
|
Proven Non-linear load Capability |
|
Full-light output from lamps & fixtures
|
|
Self-diagnostics keeps lighting environment safe & secure
|
|
DSPM/Watchdog software automatic programmable testing
|
|
LCD/LED Display Monitor keeps you in control 24/7
|
|
Pure sine wave output powers all types of lamps
|
|
Modular small footprint uses space wisely
|
|
Powerful 3 to 125 KW full-load capabilities
|
|
Dependable DSP/PWM technology for unsurpassed reliability
|
|
Economical lowest overall costs for life safety
|
|
Made is USA
|
|
ECI Modules use DSPM patented technology
|
|
Versatile - back-up solution for multiple applications: indoor & outdoor emergency lighting, exits, cash registers, computers, strategic electronics and more
|
|
Installation contractor friendly with easy access
|
|
Long Battery life temperature compensating technology monitors batteries
|
|
Meets federal, state and local codes UL924, NFPA 101, NFPA 70, NEC and OSHA
|
|
|
|
Maintenance Bypass Switch |
|
Outdoor or Harsh Environment Enclosure |
|
Phoenix "Hydrogen Off- Gassing Termination" |
|
Output Circuit Breakers |
|
Normally - Off Output Circuit Breakers |
|
Seismic Rated Bracket
|
|
Remote Panel
|
*Specifications are subject to change without notice.
|
|
|
|
 |
|
| *Power Rating |
2.2, 26,3.2,3.6,and 4.2 KW
|
| *Input Voltage |
120, 208, 240,or 277 Vac |
| *Input Voltage Reg. Range |
+10%, -15% |
| *Output Voltage |
120 or 277VAC |
| *Output Voltage Regulation |
±2% typical |
| *Output Frequency Range |
60 Hz ±5% |
| *Output Wave Form |
Sine-wave <5% @ 100% linear load |
| *Crest Factor |
2.5:1 Typical |
| *Input Protection |
Input Main Circuit Breaker |
| *Output Protection |
Output Main Circuit Breaker |
| *Surge Protection |
The unit will protect itself and the load against surges as defined in ANSI/IEEE C62.45 category A and B. |
| *Output Transformer |
Shield, isolation transformer |
| *Isolation |
Inverter complete from line |
| *Battery |
Sealed maintenance-free (AGM) lead acid |
| *Recharge Current |
10 times discharge |
| *External battery |
Provision for hardwire connection of external battery cabinets or DC source. |
| *Efficiency |
>92% |
| *Audible Noise |
<45 dB measured on Response Curve "A" |
| *Safety Agencies |
UL 1778 |
| *Operating Temperature |
0 to 40C (32 to 104F.) |
| *Storage Temperature |
-20 to 60C (-4 to 140F.) |
| *Humidity |
5 - 95% Non-condensing |
* Consult factory for others, Specifications are subject to change without notice.
|
|
PCL
Series |
Power
Rating
|
UPS
|
Weight
|
OCB
|
Battery
Type |
Voltage
(VAC) |
Audible Noise
|
Safety Approvals
|
| Dimentions |
Sealed
Mainte
nance
Free
(AGM)
Lead
Acid |
Input |
Output |
<55dB measured on Response Curve "A" |
CSA to UL 924 NFPA 101 NFPA 70 NEC |
|
PCL
|
VA/KW |
W |
H |
D
|
(LBS)
|
Available in increments of1,3,6,9 or 12
|
Select
120
208
240
or
277
|
Select
120/
240
or
277
|
| 2.4 |
26" |
44"
|
26"
|
743 |
| 2.6 |
26" |
44"
|
26"
|
743 |
| 3.0 |
26" |
44"
|
26"
|
1022 |
| 3.4 |
26" |
44"
|
26"
|
1022 |
| 3.8 |
26" |
44"
|
26"
|
1034 |
| 4.2 |
26" |
44"
|
26"
|
1034 |
|
|
