Home >> Products >> Lighting Inverter >> Defenders >> Defender 3

Defender 3

Emergency Lighting Inverter
3 - 125 KW


BATTERIES

- Sealed, maintenance-free, lead acid (AGM) batteries.

- 10 year prorated warranty

- DSP Smart Battery Monitoring System is temperature compensated maintaining maximum runtime and battery life

- Microprocessor controlled recharge and DSP overcharge protection standard

LAMPS AND LOADS

- Emergency power provides FULL LIGHT OUTPUT from all lamps and fixtures for the entire runtime

- Compatible with fluorescent, compact fluorescent, incandescent, quartz, H.I.D., LED and other lamp types

- Standard or LED Exits and other safety equipment

PROTECTION

- Provides overload, surge and undercurrent protection using DSP/PWM "Watchdog Monitoring" Protection System

- Surge protection against load surges as defined in ANSI/IEEE C62.45 category A and B

DIAGNOSTICS AND MAINTENANCE

- DSP/PWM Watch-dog Monitoring System provides complete self-diagnostic capabilities

- Informative advanced DSP Metering Display and Alarms keep you in control of your emergency lighting environment 24/7

- Automatically performs periodic self-tests ensuring a safety lighted environment prior to an emergency

- Single point of testing instead of hundreds with battery packs.

CABINET

- Free Standing Indoor or Outdoor available

- NEMA 1 standard

- NEMA 3R 4X or NEMA 12X for harsh environments

- Modular design enables flexible installation

- Forced air cooling for maximum reliability

- Systems up to 7.5 KVA are self contained; larger systems require external Battery Cabinet(s)

INSTALLATION

- Modular design and small footprint allow easy installation in electrical closet or other convenient locations

- Factory Start-Up available on all systems

SPECIAL APPLICATIONS

- DSPM PowerClone offers numerous UL924 optional devices to meet unusual or difficult application parameters

- ECI - Patented Emergency Circuit Interface modules allow fixtures and lamps on the emergency circuit(s) to be operated by normal switching and/or dimming devices in NON-emergency conditions

- Phoenix "HOT" Switch (Hydrogen Off-gassing Termination)

- Dimming Panel Interface allows use with emergency lights controlled by common dimmer panel

- DSP Remote Shutdown and programmable timers help stabilize lighting environment

CODES

- CSA Listed to UL924, NFPA 101, NFPA 70, NEC and OSHA

WARRANTY

- 1-year full warranty on system electronics. Battery warranty 1-year with 9-years pro-rata. System 1-year on-site warranty labor with DSPM supervised Start-Up.

- Maintenance contracts available.





RMP Remote Panel
RSD Remote Shutdown
FSU Factory Start-Up
SRB Seismic rated with bracket kit
PHO Phoenix HOT Switch
IDB Internal Dimmer Bypass
CAB NEMA 3R (consult factory for others)
ECM Emergency Circuit Module
NOH-120 Normally OFF "Hold ON"
NOH-277 Normally OFF "Hold ON"
OCB Output circuit breaker(s)
EMB External Maintenance Bypass Switch
NOF.120 Normally OFF Output Circuit
NOF.277 Normally OFF Output Circuit

*Specifications are subject to change without notice.




- Powerful - 3-125 KW full-load capabilities
- DSPM/Watchdog - software automatic programmable testing
- LCD Display Monitor - keeps you in control 24/7
- Dependable - DSP/PWM technology for unsurpassed reliability
- Economical - lowest overall costs for life safety
- Long Battery Life - Temperature Compensating Technology monitors
batteries
- Full-light output - from lamps & fixtures
- Self-diagnostics - keeps lighting environment safe & secure
- Sine wave - output powers all types of lamps
- Made is USA
- ECM
- Emergency Control Module
- Versatile - back-up solution for multiple applications:  indoor & outdoor
emergency lighting, exits, cash
registers, computers, strategic electronics
and more
- Outdoor or Harsh Environment - NEMA 3R or totally enclosed 4X or 12X
cabinets available
- Meets federal, state and local codes - UL924, UL1778, NFPA 101, NFPA 70,
NEC and OSHA









*Power Rating 3,4-5,6,10,12,16,24,40,50,75,100,and 125 KW
*Input Voltage 208Y/120 or 480Y/277 VAC
*Input Voltage Reg. Range +10%, -15%
*Output Voltage 208Y/ 120, 480Y/277 VAC
*Output Voltage Regulation ±2% typical
*Output Frequency Range 60 Hz ±5%
*Output Wave Form Sine-wave <3% THD. @ 100% linear load
*Crest Factor 2.5:1 Typical
*Input Protection Input Main Circuit Breaker
*Output Protection Output Main Circuit Breaker
*Surge Protection The unit will protect itself and the load against surges as defined in ANSI/IEEE C62.45 category A and B.
*Output Transformer Isolation transformer
*Isolation Complete from line
*Battery Sealed maintenance-free (AGM) lead acid
*Recharge Current Conforms to UL 924 Standard
*External battery Provision for hardwire connection of external battery cabinets or DC source.
*Efficiency >92% at 100% linear load
*Audible Noise <58 dB measured on Response Curve "A"
*Safety Agencies Listed to UL 924 Standard
*Operating Temperature 0¡Æ to 40¡ÆC (32¡Æ to 104¡ÆF.)
*Storage Temperature -20¡Æ to 60¡ÆC (-4¡Æ to 140¡ÆF.)
*Humidity 5 - 95% Non-condensing 
* Consult factory for others, Specifications are subject to change without notice.

Defender 3
Series
Power
Rating
UPS
WATTS
Weight
Battery
Type
Voltage
(VAC)
Audible
Noise
Safe
ty
Appro

vals
Cabinet
Dimentions
Cabinet
Dimentions
(Com-
bined)
Sealed
Mainte
nance
Free
(AGM)
Lead
Acid
In
put
Out
put
<67dB
Measu
red
on
Respo
nse
Curve
"A"
CSA to
UL924
NFPA
101
NEPA
70

NEC
DE3
KVA KW W H
D
No.
W
H
D
(LBS)
Select
208Y/
120VAC
or
480Y
/277VAC
15 12 42"
71"
22.5"
1
42"
71"
22.5"
2,750
30 24 42"
71"
22.5"
2 42"
71"
22.5"
5,200
50 40 42"
71"
22.5"
3 42"
71"
22.5"
7,580
75 60 50"
71"
22.5"
4 42"
71"
22.5"
10,790
100 80 50"
71"
22.5"
5 42"
71"
22.5"
13,780
125 100 50"
71"
22.5"
6 42"
71"
22.5"
16,300
Consult Factory for other systems